Jump to content

7 th. injector...


Guest |229|

Recommended Posts

hi.

is it possible to set up a 7th injector? and map i seperatly, or at least some kind of calibration.

its a v44 plugin for rb25det. want to use methanol injection. but it have to enable at some given parameters like map pressure, rpms, and tps.

Link to comment
Share on other sites

You can setup a GP PWM table to control the extra injector. The injector will need to be high impedance. Set the PWM frequency to 30 Hz.

You can set the X and Y axis on the PWM table to the values you want. The table cells would then have values from 0 to 100 to control the duty of the injector.

Ray.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...