Guest |280| Posted February 27, 2009 Report Share Posted February 27, 2009 alright went through install instructions to a "T" I get "error 10 cannot start device" Tried a second computer also running XP PRO same problem. no other error messages, but in device manager "other devices, USB device" pops up when I plug into the V44? I've tried every com port etc.... ECU communicated fine with my dealers setup Cam @ lightspeed car starts and runs Quote Link to comment Share on other sites More sharing options...
rayhall Posted February 27, 2009 Report Share Posted February 27, 2009 I have experienced this myself on one PC. We are trying to find a solution at the moment. To communicate for now..you can connect using a serial cable. If you laptop does not have serial port, use a USB adaptor. The USB cable can be converted to serial by removing the USB plug and adding a 9 pin serial connector. I will post information on how to do this if you want it. You can also ask Cam for a serial cable. Ray. Quote Link to comment Share on other sites More sharing options...
Guest |280| Posted February 28, 2009 Report Share Posted February 28, 2009 Thankyou for the quick reply, and thanks to Cam for his help too! I had to install service pack 3 "SP3" through windows update. apparently the glitch came from SP2! :mrgreen: USB works great now....time to go drive :mrgreen: & Thanks Microsoft for all that you do to make our computers worse! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.