Jump to content
Sign in to follow this  
Chris Young

36-1 trigger wheel and sensor

Recommended Posts

hi,

On my 4agte with a 4agze is there any advantage running a 36-1 trigger wheel and sensor off the crankshaft? i was going to still run the CAS as a reset signal for the sequential ignition as i was advised by a friend to do so. 

What brand of sensor would you recommend to use with the link also? and can talk me through setting it up settings?

Share this post


Link to post
Share on other sites

Okay, was looking at 9000 limiter cut with a estimated power output of 280kw ATW on 28 psi. As long as it will be accurate when I put it on the dyno, if the unit ever fails I will go down that path [it is more common due to heat soak as it sits 20mm above the turbo manifold]

just for reference what sensor should I use.

Share this post


Link to post
Share on other sites

If your going to stick with a VR style sensor I'd highly recommend the crank sensor off a 99 jaguar vanden plas. It has a very nice package size and is very well made.

 

If you plan on running a hall effect style sensor diyautotune.com has a very nice sensor for rather cheap along with a lot of very nice other quality crank sensor parts.

 

zack

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...