Leiden Posted May 13, 2015 Report Share Posted May 13, 2015 Hi,  Ive just purchased a Link G4+ Atom to run a 6cyl Nissan RB motor with a 36-1 crank trigger wheel. There is no home sync. Im wanting to run it in semi-sequential like the old Haltech E8 was. In this setup injection and ignition were firing in pairs like wastespark (1+6, 2+5, 3+4). I noticed while reading the manual that only batch/grouped injection was possible. Is this true? My other option would be to run the engine as a 3cyl 2-stroke, is this possible? Kind regards, Leiden  Quote Link to comment Share on other sites More sharing options...
Simon Posted May 13, 2015 Report Share Posted May 13, 2015 We do only fire in group mode all even numbered drives fire together and all odds together. Assuming you have high impedance injectors I would wire as 2 groups of 3. And use injector drives 1 and 2. There is not going to be any loss running in this fashion over semi sequential.  Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.