Daniel Burgess1436215411 Posted March 30, 2012 Report Share Posted March 30, 2012 Hello just bought new g4 storm and doing install now only part im stuck on is the sheilding for cam and crank on a subaru i am using a g4 with the basic loom and cutting wires i need from behind factory plug and joining so later if i need to can re solder back to oem anyways im up to doing the cam and crank triggers  the + and -ve are easy to understand and wire but what about the sheilded part  do i just wire that into the factory sheild on the oem loom  or? Quote Link to comment Share on other sites More sharing options...
Scott Posted April 2, 2012 Report Share Posted April 2, 2012 Hi Daniel, If you connect the shielding around the cam and crank wiring to the Shield/Gnd pin on the top row of the G4 Storm connector you will be doing it right. Cheers, Scott. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.