chris parnham Posted October 15, 2013 Report Share Posted October 15, 2013 sorry if this is a novice question i am new to this and everyone starts somewhere ,,, ive fitted your lem g3 to my rb25det ive wired it up got it running using the base maps its just running very rich i can only seem to increase the duty cycle but not decrease ? even when i change the master from 14 to 13 it just defaults back to 14 am i missing something simple or just doing it wrong my friend and i are setting it up on the dyno i just want to get a half nice before i get it there  many thanks chris Quote Link to comment Share on other sites More sharing options...
Scott Posted October 17, 2013 Report Share Posted October 17, 2013 Hi Chris, When you the master fuel to 13 are you then storing the setting to the ECU? If not the setting will revert back to 14. The other thing you could try is reducing the numbers in your main fuel table. Cheers, Scott Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.