Jump to content
Sign in to follow this  
neil brown

g4 storm ecu

Recommended Posts

No we don't have an adapter for the Storm for this application as we have a dedicated plugin to suit.

You could look to boomslang.us as they would be able to make you a custom one.

Share this post


Link to post
Share on other sites

Also

 

i have fitted some 25 watt 4R7 resistors for the g1 ecu to run low impedance 3 ohm injectors

 

is the storm ecu ok to do this as well 

 

looked on another thread here and you recommended 50 watt items

Share this post


Link to post
Share on other sites

For the map sensor it will depend on the age of the Storm.

Silver cased ones are 2.5bar and the ones that are in a blue case are 4Bar

Yep 25W 4.7 ohm per injector will be spot on.

Share this post


Link to post
Share on other sites

got my ecu today and updated the firmware and loaded the ver 3-4 map supplied

 

have notived the plug is missing 5 pins

 

cand i get some pins on there own and are they available

 

 

ps how do i set up the antilag using a digital input 2 as not using a maf sensor

Share this post


Link to post
Share on other sites

Yep pins are available. In any quantity.

You will need a switch wired to a Di,

Antilag will need to be conditional on this input and you will need an air bypass to allow extra air through the engine.

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...