Jump to content
Sign in to follow this  
Chipset

Log files looks corrupted ;/

Recommended Posts

1 in 5 times that i log a quite bit log file ( about 20 min or more )  i found that  the log file dont have almost any value or have same wacky  value that may was part of the real log or not part at all ( random numbers )  .

After the logging when I'm going to the log manager to save the log I'm almost sure that the log is corrupted when I see a SOL number like 1443:0....... etc   .

Today I lost a ton of fuel doing 4 gears pull to the rpm limit using different boost levels to fine tune my map ..  and my gift  was one of those logs that I told before.

I'm attaching the log  so that you may investigate what is really happening , and all this precious time  and money goes bye bye :(

 

( I'm logging the default parameters  in 20hz  and I don't know if its a problem but i have both wideband 1 and an volt 6 (wideband) selected to the log parameters . I guess its ok )

 

https://rapidshare.com/files/1995440842/run.llg

 

Thank you

Share this post


Link to post
Share on other sites

Hi Chipset,

I had a brief look at your log and it's not an error i've seen before.

I will get someone else here to have a closer look.

If you could post another log with the same issue it may help.

Regards

-Cameron

Share this post


Link to post
Share on other sites

Thank you im waiting for this !

I want to add that this problem is irrelevant of the PC Link software Version because i had this problem even  Since 4.5 firmware if i remember right ,  till the latest 4.8


If it happens again i will upload the faulty log so you can have more to investigate.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...