Rick Pan Posted August 17, 2012 Report Share Posted August 17, 2012 hey, just wondering if anyone out there knows how to, or if its even possible, to cut injection at 100% throttle when cranking? The reason i'm asking is because it would be much easier to set a trigger at 100% TP (during cranking only) to cut fueling during cranking to clear the cylinder instead of constantly unplugging the injector all the time. cheers. Quote Link to comment Share on other sites More sharing options...
Scott Posted August 17, 2012 Report Share Posted August 17, 2012 Hi Rick, If it is just a temporary measure to clear the cylinders you could set injection mode to OFF in PCLink. If you want a more permanent solution you could wire a Digital Input up to a switch, and then make the DI switch to another fuel table which is zeroed out. Cheers, Scott. Quote Link to comment Share on other sites More sharing options...
Crispin Posted August 23, 2012 Report Share Posted August 23, 2012 Configure a virtual aux with switching condition TPS > 95% and RPM < 400 and have that switch to zeroed out fuel map. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.