John1436215403 Posted May 29, 2010 Report Share Posted May 29, 2010 Updated firmware from 4.4.1 to 4.5.1 and now no signal from trig 2? Quote Link to comment Share on other sites More sharing options...
Simon Posted May 30, 2010 Report Share Posted May 30, 2010 You will need recheck the trigger settings. If you go to trigger two you will most likely find it set to 'none' it should be set to cam x1 Quote Link to comment Share on other sites More sharing options...
John1436215403 Posted May 31, 2010 Author Report Share Posted May 31, 2010 Ok, found distributor decided to have issues. Obtained & fitted another distributor however this distributor is slightly different, 24 tooth & 4 tooth, I cannot for the life of me figure out how to get this going correctly Engine is a 4AGE 16v running sequencial injection & Direct spark ignition. Everything i have tried with either multi tooth or 1 tooth per TDC either gives me no spark at all or trig one error counter just keeps climbing. How is this ment to be configured? Cheers Quote Link to comment Share on other sites More sharing options...
John1436215403 Posted June 1, 2010 Author Report Share Posted June 1, 2010 Thank you for your help simon via phone. Tooth removed from 24 so now running missing tooth & all is going well. Thank you once again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.