Jump to content
Tomas_St

3SGTE

Recommended Posts

Hi Tomas_St,

what serial number is the ECU and what firmware are you using.

What engine do you have to create a base map for.

I am unaware of a base MAP registra for theses ECU's , if you can not setup the base file on your own you should really be seeking the assistance of an experienced tuner.

Having the a Base Map is one thing, whether or not it works with your setup is another thing.

I am not doubting your abilities etc , just trying to eliminate heartache and stress if things go wrong.

Regards

Dave.

Share this post


Link to post
Share on other sites

You've been looking for 18 months?

If your ECU is able to be upgraded to the latest firmware, it comes with a base map for the ST185 from memory.

lool yeah been put ecu on shell used another one. time to put that one 

what else i need after update. do repining too ?

Share this post


Link to post
Share on other sites

Assuming you only have the G3 Linkplus with no adapter then the wiring will need to be changed to suit the ECU pinout. Then you will need to configure the ECU to haow it has been wired.

http://forums.linkecu.com/applications/core/interface/file/attachment.php?id=2540

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...