Anders Reineborg Posted August 2, 2015 Report Share Posted August 2, 2015 On the new firmware (june) 2d launch doesn't work, i activate my launch with the handbrake with di3 goin to ground.i clearly see the di3 being activated when the handbrake is lifted, but the launch doesn't go in.so i changed to single zone then it worked.So what should i do to get the 2d work??and what settings should i have to build much boost at low rpm 5500-6000rpm??yes i have a big turbo and 2 litre Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted August 2, 2015 Report Share Posted August 2, 2015 Hi Anders,we need to see how you did setup the 2D setup to be able to advise on where you are going wrong.The HELP file has very good instructions on all settings.RegardsDave. Quote Link to comment Share on other sites More sharing options...
Anders Reineborg Posted August 3, 2015 Author Report Share Posted August 3, 2015 Nothing is changed fron last year when it worked, except firmware.i know at least two others that have the same problem.they changed to virtual aux to get it activated and i don't want to do that, i want it to work as it was last year.where should i send my tune to? Quote Link to comment Share on other sites More sharing options...
Anders Reineborg Posted August 4, 2015 Author Report Share Posted August 4, 2015 so what should we do to solve this firmware bug? Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted August 4, 2015 Report Share Posted August 4, 2015 Hi Anders,you can send the file to Simon on PM in this forum or to me [email protected]RegardsDave. Quote Link to comment Share on other sites More sharing options...
Anders Reineborg Posted August 6, 2015 Author Report Share Posted August 6, 2015 Solved the launch firmware bug yet? Quote Link to comment Share on other sites More sharing options...
Simon Posted August 6, 2015 Report Share Posted August 6, 2015 Are you able to please send the PCL file (MAP) from your ECU for us to test this on the bench?Due to the massive number of set up combinations we need your file to get an exact match. Quote Link to comment Share on other sites More sharing options...
Anders Reineborg Posted August 6, 2015 Author Report Share Posted August 6, 2015 I just mailed the tune to you Simon Quote Link to comment Share on other sites More sharing options...
Simon Posted August 6, 2015 Report Share Posted August 6, 2015 Email replied to. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.