Skeeed3r Posted August 28, 2015 Report Share Posted August 28, 2015 Hi everyone,do I need for an Innovate LC2 a special cal table or can I use the LC1 one ? And where can I find this cal if I need one thanks a lot Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted August 29, 2015 Report Share Posted August 29, 2015 (edited) Hi Skeeed3r,The Innovate LC 2 analogue volt output is as follows,YELLOW WIRE IS ANALOGUE VOLT OUTPUTLC 2 EARTH should ground at the same earth point as the ECU.0 volts = 7.35 AFR5 volts = 22.39 AFR.RegardsDave. Edited August 29, 2015 by Dave Kriedeman Quote Link to comment Share on other sites More sharing options...
Simon Posted August 31, 2015 Report Share Posted August 31, 2015 You will need to use Cal 4,5 or 6 for this as the LC1 cal is different. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.