gijsje Posted October 4, 2015 Report Share Posted October 4, 2015 I am trying to hook up a divice that can read the aim datastream but i am unable to connect the RB plug in module.On what port do i need to connect this?is is to the usb port or to the rs232 port on the board?i could not find any information about the rs232 port Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted October 4, 2015 Report Share Posted October 4, 2015 Hi gijsje,what exactly are you trying to do.Are you trying to CAN - SNIFF the AIM DATA STREAM form the LINK ECU.What module or device are you using, does it support both RS232 and CAN BUS.RegardsDave. Quote Link to comment Share on other sites More sharing options...
gijsje Posted October 6, 2015 Author Report Share Posted October 6, 2015 it uses rs232 aim data stream Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted October 6, 2015 Report Share Posted October 6, 2015 Hi gijsje,what ecu are you using , plug in or standalone.Standalone you can use the second plug on the face , plug in use the onboard or tuning lead but you cannot have a tuning lead connected at the same time as the RS 232 device, either way.RegardsDave. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.