Jump to content
Sign in to follow this  
gijsje

AIM datastream

Recommended Posts

I am trying to hook up a divice that can read the aim datastream but i am unable to connect the RB plug in module.

On what port do i need to connect this?

is is to the usb port or to the rs232 port on the board?

i could not find any information about the rs232 port

Share this post


Link to post
Share on other sites

Hi gijsje,

what exactly are you trying to do.

Are you trying to CAN - SNIFF the AIM DATA STREAM form the LINK ECU.

What module or device are you using, does it support both RS232 and CAN BUS.

Regards

Dave.

 

Share this post


Link to post
Share on other sites

Hi gijsje,

what ecu are you using , plug in or standalone.

Standalone you can use the second plug on the face , plug in use the onboard or tuning lead but you cannot have a tuning lead connected at the same time as the RS 232 device, either way.

Regards

Dave.

LINK_COMMS_PORT_PINOUTS..thumb.gif.c6dd0

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...