Jump to content
Sign in to follow this  

rb25det neo cas pinout

Recommended Posts


what coils are you using.

Normally they are all marked with + - and I

+ = Ignition power

- = Grounded to cylinder head

I = Ignition trigger.

Normally the trigger wire is the centre wire.

So just check for 12 volts with ignition on at one end with multi meter and check ohms to cylinder head at the other end, should be very close to 0 OHMS and if you do a voltage check , ignition OFF should read less than one volt.



Share this post

Link to post
Share on other sites

awesome that made my life a lot easier thanks a million! :) my one is the plastic cas so im guessing its the later one so from left to right will be ground power trig one trig two?

Yep spot on.

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this