Grant Baker Posted December 21, 2015 Report Share Posted December 21, 2015 Hi Guys.Does this look like a "normal" Link 5 BAR Map Sensor output:Pressure (BAR) - Volt-0.50.5300.880.51.2311.581.51.9222.272.52.6232.973.53.3243.674.54.0254.375.54.72 Quote Link to comment Share on other sites More sharing options...
Scott Posted December 22, 2015 Report Share Posted December 22, 2015 Hi Grant,Are you talking about this 5 bar sensor?http://www.linkecu.com/MAP5_2Using the 'SRS 5 Bar' calibration I get the following results:MAP (kPa) Volts0 0.5129 1.5261 2.5391 3.5521 4.5 Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted December 22, 2015 Author Report Share Posted December 22, 2015 Calibration is very different!This is actually a "modified" Link 2.5 bar sensor with what is meant to be a 5 bar sensor soldered in. Looks more like 7 bar though! 6.5 bar abs at 4.72v Quote Link to comment Share on other sites More sharing options...
Simon Posted December 22, 2015 Report Share Posted December 22, 2015 It will be 7bar then. Go for the 7 bar cal in PC link Grant Baker 1 Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted December 22, 2015 Author Report Share Posted December 22, 2015 Thanks Simon. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.