Jump to content
Sign in to follow this  
khaled DRiFT

rb25det neo ecu pinout

Recommended Posts

I have attached the circuit diagram and the ecu pinouts, these can also be found in the EC section of the R34 Service Manual pdf

Hope it helps

Neo Circuit Diagram.jpg

Neo Pinout 1.jpg

Neo Pinout 2.jpg

Share this post


Link to post
Share on other sites

Hi khaled,

please find information you require attached below.

The Connector block and pin description in the LINK HELP FILE is to suit a REV 1.4 circuit board.

There are a few funky things with this ecu.

Regards

Dave.

 

R34 GTT ECU SCHEMATICS.jpg

Share this post


Link to post
Share on other sites

Hi,

as I stated the pinout is for a revision 1.4 board.

I have attached an RB25 DET NEO ECU SCHEMATIC to help you out as this is all I have.

If you can't get the ECU PIN OUT at least you can bell the circuits with the schematics.

Regards

Dave.

Share this post


Link to post
Share on other sites

Remember that the pinouts are viewed looking into the ECU side of the connector, or the wiring side of the loom plug. In the photo above you are looking into the loom plug from the ecu side, and its also upside down.

From memory all grey plug ecu's are interchangable. I have used a stagea ecu to run a Neo RB25DET R34 when the traction control system has been removed.

Edited by Leiden O'Sullivan

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...