Jump to content

xtreme output/digital input wiring


r32skizzzaaa

Recommended Posts

wiring an xtreme into my r32 rb25det drift car

Can someone point me in the right direction to what pin wire each component should be to. have the 2 ignition and injector wires left over also.

  • oil pressure warning light 
  • vct
  • engine check light
  • over temp light
  • flex fuel switch
  • fan relay (ground)
  • external tacho
  • fuel pump relay
  • speed sensor
  • boost solenoid (mac)
  • intercooler water spray relay
  • clutch switch
  • anti theft

My guess is this

  • oil pressure warning light (output 8)
  • vct  (output 1)
  • engine check light (output 9)
  • over temp light (output 10)
  • flex fuel switch (digital input 10)
  • fan relay (ground)
  • external tacho (output 5)
  • fuel pump relay (output 2)
  • speed sensor (digital input 7)
  • boost solenoid (mac) (output 3)
  • intercooler water spray relay (output 4)
  • clutch switch (digital input 8)
  • anti theft (digital input 9)

Thanks in advance

 

Link to comment
Share on other sites

 

  • oil pressure warning light (output 8)
  • vct  (output 1)
  • engine check light (output 9)
  • over temp light (output 10)
  • flex fuel switch (digital input 10)
  • fan relay (ground)
  • external tacho (output 5)
  • fuel pump relay (output 2)
  • speed sensor (digital input 7)
  • boost solenoid (mac) (output 3)
  • intercooler water spray relay (output 4)
  • clutch switch (digital input 8)
  • anti theft (digital input 9)

Thanks in advance

 

As you have listed them will be fine, with the exception of the fan relay, this will need to activated by an Auxiliary Output.

Edited by Scott
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...