mldc Posted February 23, 2016 Report Share Posted February 23, 2016 (edited) Hello guys,I have new gear cut sensor, now I need to know how to wire it and tune properly.Im thinking of Digital input and select Gear Cut or GP input for tune.. It will be installed on sequential car gearbox. Edited February 23, 2016 by mldc Quote Link to comment Share on other sites More sharing options...
Simon Posted February 23, 2016 Report Share Posted February 23, 2016 (edited) Hi For this to work with the V44 you will need to use a converter to change the signal to a on / off type (digital)As the ECU is not geared to be able to accept a 0-5V signal for a gear cut function.http://www.geartronics.co.uk/flatshift.htm This would be a good interface option. Off note the i44 / G4+ range of ECUs can accept the input directly with out the need for a converter. Edited February 23, 2016 by Simon Added more info Quote Link to comment Share on other sites More sharing options...
mldc Posted February 23, 2016 Author Report Share Posted February 23, 2016 Thx Simon,This should also works yes? http://www.kasensors.com/us/products/sensor-switch Quote Link to comment Share on other sites More sharing options...
Scott Posted February 24, 2016 Report Share Posted February 24, 2016 That unit will work well as it switches to ground when the threshold level is reached. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.