T4700 Posted March 14, 2016 Report Share Posted March 14, 2016 Hi,Link Thunder has two internal Knock channels.But I can not find any settings for allocate the specific cylinders to a specific sensor.For example, on 5-cylinder inline engines, there are 2 knock sensors. Knock sensor 1 for cylinder 1,2,3 and Knock sensor 2 for cylinder 4,5.How can I set this up in PCLink?How does PCLink knows, which knock sensor is allocated to which cylinders? (also interesting for 6 and 8 cylinder V engines)regards Quote Link to comment Share on other sites More sharing options...
Simon Posted March 14, 2016 Report Share Posted March 14, 2016 The ECU combines the two signals to give and overall signal. It does not assign one sensor to a group of cylinders.The cylinder timing is done through the settings in the knock control and the engine position information from the trigger inputs. Quote Link to comment Share on other sites More sharing options...
T4700 Posted March 15, 2016 Author Report Share Posted March 15, 2016 Ok, Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.