Leonv33 Posted April 14, 2016 Report Share Posted April 14, 2016 Have a KMS wide band fitted and was wondering if it is okay to remove the 2 x factory narrow bands? ( the EC manager standard config file shows only one is connected on AN volt 6)If I do this then I will have a spare input AN volt 6 as well as AN volt 4 & AN volt 5 that are signals from the old AFMs I want to run 2 more signals through the AFM plugs (fitting other connectors) and wondering if the OEM wiring signal ground pins on the plugs are actually connected to the G4+ plugin signal ground or will I have to use the Expansion Signal Ground.Do not want to alter factory loom inside the cabin.Already used all the expansion inputs.Many thanks in advance. Quote Link to comment Share on other sites More sharing options...
Scott Posted April 14, 2016 Report Share Posted April 14, 2016 Hi Michael,No problem to use the narrowband input (An V6) for the KMS wide-band controller output.The AFM ground is connected to the ECU on Pin 26. Leonv33 1 Quote Link to comment Share on other sites More sharing options...
Leonv33 Posted April 14, 2016 Author Report Share Posted April 14, 2016 Hi Scott,That was quick ! thank you very much for the clarification. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.