impellerhead Posted April 14, 2016 Report Share Posted April 14, 2016 (edited) So I have this PWM to 0-10v module connected to my G4+ to drive an Electric Pressure RegulatorHad some issues not getting 10v on the output, it was low battery voltage so that was an easy fix Anyway, here's a little test video: Test Video: https://youtu.be/yEZeBy3uhlcDisplay on regulator showing PSI Edited April 14, 2016 by impellerhead TechDave 1 Quote Link to comment Share on other sites More sharing options...
Scott Posted April 15, 2016 Report Share Posted April 15, 2016 Cool vid. Is the pressure regulator going to be used for boost? Quote Link to comment Share on other sites More sharing options...
impellerhead Posted April 15, 2016 Author Report Share Posted April 15, 2016 Thanks Scott. Had these lying around for quite some years now with the purpose to use them for boost control . Not until now I have had a converter so yes I think we are going to test it for boost control. Quote Link to comment Share on other sites More sharing options...
Scott Posted April 15, 2016 Report Share Posted April 15, 2016 Keep us posted on how it goes. Quote Link to comment Share on other sites More sharing options...
gojira Posted May 4, 2016 Report Share Posted May 4, 2016 i have at home the Power-IO PWM modules for electric waterpump and fan control temp based, faster to working temp, more steady temps, even when giving full power/trottle.and can get aftercooling to reduce hotspots in cilinderhead when shutting down engine Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.