Jon.C Posted April 15, 2016 Report Share Posted April 15, 2016 i run two fuel pumps on my link G4 storm. And i want to stage the one pump.(make pump nr2 start when for instance when rpm ecxeeds 3500rpm ore controlled by TPS.) Does the software support this? If yes, how to do? Thanks in advance Quote Link to comment Share on other sites More sharing options...
Scott Posted April 18, 2016 Report Share Posted April 18, 2016 Hi Jon,Yes you can make a setup like this. You would wire the second fuel pump relay to a spare aux output channel. You would then set this aux output channel up as 'GP Output', in the conditions for it you would include the aux output of fuel pump 1. This is for safety. You might set it up like this:You could make it more complex if desired. Quote Link to comment Share on other sites More sharing options...
Jon.C Posted April 18, 2016 Author Report Share Posted April 18, 2016 Thank you Scott! This worked fine! Only Its not possible to rename in my config, but that doesnt mather... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.