Chev LS trigger question

[Skylinekrille]

Quick question

Can the Link G4 system make it possible to use the LS Black crank trigger sensor along with the 60-2 trigger wheel? Or do i need to get the LS grey trigger sensor

 

[Scott]

I don't have experience in using these sensors. I've done some reading (http://www.lsenginediy.com/crankshaft-camshaft-signals-guide/) and from this I would say no. There are three possible setups that I think will work with our ECU:

A) Black sensor, 24 tooth (double layer) wheel, with cam level type sync signal

or 

B ) Grey sensor, 60-2 tooth wheel, with cam level type signal.

or

C) ?? Sensor (LS2 or LS 7), 60-2 tooth wheel, with 4 tooth cam wheel.

Edited April 18, 2016 by Scott
Added third option

[Skylinekrille]

Confirmed now using trigger scope, The crank pulse when using LS Black trigger sensor with the 60-2 trigger wheel is weird, Managed to get a Grey sensor and got a proper trigger signal and its working fine.