Leonv33 Posted April 21, 2016 Report Share Posted April 21, 2016 I have the Link G4+ plug in and need to know if there is a 120 ohm resistor on the board betwen H & L or do I need to fit one on the other end of the bus.Installing a KMS uego and could not find anything concrete about this in the manual. Help much appreciatedMike Quote Link to comment Share on other sites More sharing options...
Scott Posted April 21, 2016 Report Share Posted April 21, 2016 (edited) Hi Mike,The ECU has a CAN bus terminating resistor fitted, depending on length of bus you may need to add a resistor if the KMS does not have one. Edited April 21, 2016 by Scott additional info Leonv33 1 Quote Link to comment Share on other sites More sharing options...
Leonv33 Posted April 21, 2016 Author Report Share Posted April 21, 2016 Thanks Scott! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.