Jump to content

How to connect Aquamist controller to Link Storm


PitBull

Recommended Posts

Your aux 1 is set up correctly.  You want constant frequency for a solenoid.  Im not sure what frequency is suitable for the aquamist solenoid but 30Hz sounds like the ball park I would expect.  

What DI is your failsafe connected to?

Link to comment
Share on other sites

Aquamist provies 4.7V under "no fault". (the one I use  v3.11)  (orange wire in this model)

Have you you checked the voltage supplied ? From what I see the voltage is adjustable. (Link DI seems to operate on 5-14V) 

 

Your DI8 is linked to fuel table 2.. have you tested that it switches once a fault ?

There are also dip switches for different safety modes on the Aquamist, check those as well.

3 hours ago, Akumazeto said:

di 8. SO with the frequency being used does it still use the table?

 

Link to comment
Share on other sites

9 hours ago, Akumazeto said:

di 8. SO with the frequency being used does it still use the table?

Yes, of course the Duty cycle table is used, the frequency will be fixed.  

Can you explain what how you want it to work.  When WMI is active you want to change to fuel table 2?

When WMI is active but the failsafe signal is present what do you want to do?

When WMI is not active but failsafe signal is present what do you want to do?

 

Can you tell me the voltage on the fail safe wire under these three scenarios:

  1. WMI system armed, failsafe/water level etc ok.
  2. WMI system armed, failsafe/water level in alarm condition.
  3. WMI system off.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...