Peacekz Posted May 13, 2016 Report Share Posted May 13, 2016 Hello.My link ECU goes mad in close loop. Not sure if it was ever working - after last tune i decided to allow ECU to do a close loop lamda managment based on Wideband input and the ECU do exacly negative changesI mean if at idle i Run 14, ecu does not remove fuel it adds fuel instead, and if i run 15 it removes (my AFR target table at idle is 14.7)Is there a fix for this issue? Quote Link to comment Share on other sites More sharing options...
Scott Posted May 13, 2016 Report Share Posted May 13, 2016 HiWhich version of firmware are you running?Can you post your base-map and a log of this problem occurring? Quote Link to comment Share on other sites More sharing options...
Peacekz Posted May 13, 2016 Author Report Share Posted May 13, 2016 Hi ScotOk i will post these as soon as posible - i damaged my laptop screen and it is in service now, as soon as i got it back i will post these. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.