Llewellyn Posted July 17, 2016 Report Share Posted July 17, 2016 Hi Guys,I know you use the Bosch wideband controller in the Thunder. Does the Thunder support the new LSU ADV or can it be made to? Would really like to install one of the new preturbo sensors!http://www.bosch-motorsport.com/media/catalog_resources/Lambda_Sensor_LSU_ADV_ADV_pre_Turbo_Datasheet_51_en_13769312011pdf.pdfCheers,Llewellyn Quote Link to comment Share on other sites More sharing options...
JMP Posted July 17, 2016 Report Share Posted July 17, 2016 I doubt it would work given it doesn't have a trimming resistor Quote Link to comment Share on other sites More sharing options...
Rich RDE Posted July 17, 2016 Report Share Posted July 17, 2016 I believe that this sensor has a special control unit you can purchase from Bosch motorsports and then run a CAN to your ECU. Check on their website for more information. This will allow you to use this pre-turbo sensor. Quote Link to comment Share on other sites More sharing options...
Llewellyn Posted July 18, 2016 Author Report Share Posted July 18, 2016 Ecotrons use the standard Bosch CJ125 to drive the LSU-ADV - I am quite sure the Thunder has the same chip onboard so should be able to do it; Hence my asking! Quote Link to comment Share on other sites More sharing options...
Scott Posted July 19, 2016 Report Share Posted July 19, 2016 Hi Llewellyn, I'll ask our engineering team and advise when I hear back.Scott. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.