Jump to content
Sign in to follow this  
jonnyt80

Startup fuellung

Recommended Posts

Finally got the car started after finding out the timing settings.

Am i right in saying that adjusting the master fuel till it starts is the riht way to go as ther is no base map for my engine.

I had to use 24ms master fuel for the car to start. Is there anything else i need before i start dialling idle in etc

Share this post


Link to post
Share on other sites

Once you have the engine running try tuning a cell with minimum fuel requirements (low engine speed, low load), and then try and tune a cell with maximum fuel requirements. This will show the range of numbers that you will end up using in the fuel table. If the spread is too narrow (30 to 70) then decrease your master fuel number. If the spread is too wide (you need lower or higher numbers in the fuel table than it allows) increase your master fuel number.

Scott.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...