Davidv Posted August 14, 2016 Report Share Posted August 14, 2016 (edited) Hey guysIt looks like there's a plethora of products that monitor tyre temp/pressures, using transmitters in the wheel stems which is cool.I've recently bought some semi slicks and want to get the most out of them and ensure they arent going too high on pressure.Has anyone setup CAN-BUS with a G4+ to datalog tyre temps/pressures so they're viewable in the datalogs?Or otherwise, I've yet to find a setup that is a stand alone system that can datalog the results rather than just monitor in realtime. Does anyone know of a product which does this?Thanks Edited August 14, 2016 by Davidv Quote Link to comment Share on other sites More sharing options...
Scott Posted August 15, 2016 Report Share Posted August 15, 2016 Hi David,I have no experience with using a tire pressure/temperature monitoring system. However if the system transmits onto the CAN bus there is a fairly good chance the data can be brought into the ECU. We do not have dedicated parameters for tire pressure/temperature, but you could assign the data to CAN Volt channels. Scott Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.