fanatrally Posted August 15, 2016 Report Share Posted August 15, 2016 HI!I have ecu EVO 9+ and dash Racepak street .I connect via CAN bus ,but dont configure the ECU and dash(Please help me Quote Link to comment Share on other sites More sharing options...
Scott Posted August 16, 2016 Report Share Posted August 16, 2016 Hi, I'm not familiar with the Racepak street, I think it may still be an IQ3. If this is the case then you will need the racepak Link G4+ Vnet modul: http://www.racepak.com/downloads/pdf/EFI_modules/230-VM-EFILINK.pdfYou can then find the instructions for setting up the ECU's CAN configuration under PCLink Help > G4+ ECU Tuning Functions > CAN > Device Specific CAN Information > RacePak IQ3 DisplayScott Quote Link to comment Share on other sites More sharing options...
fanatrally Posted August 16, 2016 Author Report Share Posted August 16, 2016 Thank you. I need pinout for motherboard connector Can 1 and 2. Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 16, 2016 Report Share Posted August 16, 2016 Thank you. I need pinout for motherboard connector Can 1 and 2.I agree, this info should be in the help file or documented somewhere, I always need to search it... Try this:http://forums.linkecu.com/index.php?/topic/1869-where-is-serial-connection/&do=findComment&comment=24947 Quote Link to comment Share on other sites More sharing options...
Scott Posted August 17, 2016 Report Share Posted August 17, 2016 Hi Adam,I've asked for this to be added to the plug-in ECU section of the PCLink help file.Scott Quote Link to comment Share on other sites More sharing options...
fanatrally Posted August 17, 2016 Author Report Share Posted August 17, 2016 Thank you !! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.