Remy van den Hoek Posted August 23, 2016 Report Share Posted August 23, 2016 Hi, due to the limitations of my old G1 ecu I'm in the market for a newer product.If I choose the G4+ Atom, would it be possible to use the custom loom from my G1 by simply taking the pins out of the G1 connector and into the G4 connector? Another option would be the 40mm loom and solder everything.For the record I only want a ecu with some more flexibilty (mostly fuel wise) all sensors, dizzy with hall sensor etc. will remain.Thanks Remy Quote Link to comment Share on other sites More sharing options...
Scott Posted August 24, 2016 Report Share Posted August 24, 2016 Hi Remy,The pins for the G1 connector are different than the G4 connector, so you would need to solder new wires on, or cut off the G1 pins and use our G4/G4+ plug and pin kit.http://dealers.linkecu.com/TKAScott Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.