Ramantanis Dimitris Posted September 1, 2016 Report Share Posted September 1, 2016 (edited) Hi, Can I drive on aux 9/10 a CE light? I have connected Check engine light on aux 9 and ecu fault 73 appears? and check engine flashes?If I energise this output like a gp output then no fault appears. What maybe the problem? Edited September 1, 2016 by Ramantanis Dimitris Quote Link to comment Share on other sites More sharing options...
Ramantanis Dimitris Posted September 1, 2016 Author Report Share Posted September 1, 2016 I have disconnected the lamp from the output. With the cable in the air, when I enable this port, the code 73 appers. At runtime values the voltagr of the 9/10 port drops to 4.5 when I enable. Quote Link to comment Share on other sites More sharing options...
Scott Posted September 2, 2016 Report Share Posted September 2, 2016 Hi Ramantanis,Which ECU model do you have?Which version of firmware are you running?On the B wiring connector do you have +14V (ign switched) to pin 5?Scott Quote Link to comment Share on other sites More sharing options...
Ramantanis Dimitris Posted September 4, 2016 Author Report Share Posted September 4, 2016 I88 model. solved power cable for b connector didnt have good connection.Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.