sbn1979 Posted September 10, 2016 Report Share Posted September 10, 2016 Vehicle starts fine on stock ecu. On G4 I cant hear pump working, is their a known pin swap required before I start getting stuck in? Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 11, 2016 Report Share Posted September 11, 2016 I dont think you normally need to do any pin or jumper swaps but there is this note in the help:Note: On some models the Fuel pump output and A/C clutch output are in opposite positions. Your base-map will need to be modified if this is the case. Quote Link to comment Share on other sites More sharing options...
sbn1979 Posted September 11, 2016 Author Report Share Posted September 11, 2016 Yes mate I saw that but applies to evo 4 only Just been informed will possibly apply to 7-8 the pin swap so going to try Quote Link to comment Share on other sites More sharing options...
sbn1979 Posted September 11, 2016 Author Report Share Posted September 11, 2016 Sorted was pin swap Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.