Jump to content
Hyperblade

Obd2 Bluetooth Reader and Torque App?

Recommended Posts

On 3/6/2019 at 11:22 AM, Steve said:

Yes android. G4+ works with obd2 so yes. 

As for lag there wil always be SOME. But its not bad.. 

Steve when you say its not bad, can you accurately see rpm or afr?

Share this post


Link to post
Share on other sites

I dont use it now (neither link ecu or obd2 over bluetooth) but have had it in the past. I was happy with it for what it was. I used it for when i needed to watch some data live for some reason and didnt have my laptop with me. Just flipped up the phone and launched an app. 

What are you planning? Thinking of replacing the entire dash or just want to use it for "gauges"? 

Share this post


Link to post
Share on other sites
1 hour ago, Steve said:

 

On 3/6/2019 at 11:22 AM, Steve said:

Steve i want just so i can see some info:

Afr

Oil/air temp

Oil pressure (is this even possible?)

Boost

 

That should be enough for me.

I guess no need to be lightning fast because the ecu should be way Faster than the driver and put the car on safe mod before i even check.

 

Share this post


Link to post
Share on other sites

If i remember correctly you cant see oil pressure as its not really an obd2 pid. 

But if you set up a good safety around oilpressure in the ecu you are golden anyways. 

Sounds like this should work out for you. 

Btw its much faster than the cheap ebay adaptors out there. 

Share this post


Link to post
Share on other sites
7 minutes ago, Steve said:

If i remember correctly you cant see oil pressure as its not really an obd2 pid. 

But if you set up a good safety around oilpressure in the ecu you are golden anyways. 

Sounds like this should work out for you. 

Btw its much faster than the cheap ebay adaptors out there. 

You are refering to the mx+ right?

Share this post


Link to post
Share on other sites
On 3/9/2019 at 8:16 AM, Steve said:

If i remember correctly you cant see oil pressure as its not really an obd2 pid. 

But if you set up a good safety around oilpressure in the ecu you are golden anyways. 

Sounds like this should work out for you. 

Btw its much faster than the cheap ebay adaptors out there. 

I have oil pressure running in torque pro from a generation 3 LS1 factory ECU, other aftermarket ECU's have this available

Share this post


Link to post
Share on other sites

I'm also interested in oil pressure via ODB2.  I want to log it so I can check for any oil surge even though I have the NZ EFI pressure sensor wired in with safety protection on the tune.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...