SRP Posted September 29, 2016 Report Share Posted September 29, 2016 So I'll be installing a Thunder ECU in my 06 WRX. At the moment in sorting out my wiring loom and pulling out all my redundant wiring.My question is, can I use the ABS wheel speed sensors for data logging and speed without affecting the ABS module or will it through a hissy fit? If so do I just hook into the signal wire going from the WSS back to the ABS module?Scott Quote Link to comment Share on other sites More sharing options...
Scott Posted September 29, 2016 Report Share Posted September 29, 2016 Hi Scott,If the WRX has reluctor type wheel speed sensors then the Thunder can connect to these without any problem for the ABS. a pair of wires will go from the C connector of the ECU to each sensor. Scott Quote Link to comment Share on other sites More sharing options...
SRP Posted September 29, 2016 Author Report Share Posted September 29, 2016 Awesome! Probably should have looked harder in the manual. haha. Thanks a lot for the quick reply. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.