lostsoul Posted October 28, 2016 Report Share Posted October 28, 2016 Must the Thunder ECU be wired as per the ECU Hold Power help file?If not, what is the other way of wiring the "Main Relay" and "Ignition Relay" and how do I configure the software to suit? Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 28, 2016 Report Share Posted October 28, 2016 Are you intending to use DBW or stepper motor IAC in your application? Quote Link to comment Share on other sites More sharing options...
lostsoul Posted October 28, 2016 Author Report Share Posted October 28, 2016 DBW ?? ... using factory Nissan IAC ( 2 pin ) Quote Link to comment Share on other sites More sharing options...
lostsoul Posted October 28, 2016 Author Report Share Posted October 28, 2016 Found out what DBW is ( stopped being lazy ) ... Anyway,so no to both, so I guess there is no need for ECU Hold Power.So just need to sort the wiring and config stuff. Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 28, 2016 Report Share Posted October 28, 2016 Ok, for the power wiring I would suggest the scheme below. I'll take a look at the config later when I'm at a PC but I suspect the std thunder base map will work with this wiring. Quote Link to comment Share on other sites More sharing options...
lostsoul Posted October 29, 2016 Author Report Share Posted October 29, 2016 3e1b5b2ee6.png ... not working. Thanks for your help. Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 29, 2016 Report Share Posted October 29, 2016 3e1b5b2ee6.png ... not working.Are you sure, the diagram is showing on my phone ok. Maybe try refreshing you browser? Quote Link to comment Share on other sites More sharing options...
lostsoul Posted October 29, 2016 Author Report Share Posted October 29, 2016 Na, not working here, will try when I get home.Cheers Quote Link to comment Share on other sites More sharing options...
lostsoul Posted October 29, 2016 Author Report Share Posted October 29, 2016 Yup, can see it at home ... so, the only wiring options for the main & ignition relays are the 2 shown in the PC Link help file? Quote Link to comment Share on other sites More sharing options...
Steve Posted October 30, 2016 Report Share Posted October 30, 2016 What do you want to do buddy? Quote Link to comment Share on other sites More sharing options...
dp_tech Posted October 30, 2016 Report Share Posted October 30, 2016 (edited) Hi all,Who knows, if I use the DBW throttle control, do I need to keeping hold power function for the Fury ecu? RegardsPavlo Edited October 30, 2016 by dp_tech Quote Link to comment Share on other sites More sharing options...
Scott Posted October 31, 2016 Report Share Posted October 31, 2016 ECU hold power is useful for resetting idle stepper motors when the engine shuts down.If you don't need ECU Hold Power, then don't use the Main Relay or Ignition Switch pins and wire the ECU up like this:Scott Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.