Jump to content
Sign in to follow this  
Larsi566

No Rpm Signal Or Spark

Recommended Posts

Hello

I just bought a vw golf 1.8 16v g60 car and I am wiring up the Link g3. there is no spark and on PC link it looks like there is no Rpm signal. i have measured with scoop on the yellow cabel for trigger 1 and it is changing between 5 and 0 volt when cranking but no life on Rpm meter on pc.

maybe there is some wrong adjustment on pc link? it is spark when i try ignition test. realy hope someone has some tip for me to try :-)

Share this post


Link to post
Share on other sites

You are on the right diagnostic track with finding the problem. The ECU will not do spark until it is reading engine speed.

What is the tooth pattern that trigger 1 and trigger 2 see?

Please attach your base-map.

Scott

Share this post


Link to post
Share on other sites

I found the problem :-) it was something wrong in the trigger setup, sync pulse was set to Cam. but it should be set to None :-) 

Now maybe its time to celebrate Christmas :-) :-) have been working on this car none stop all week an last weekend :-)

Thanks for help everyone :-D and merry merry Christmas :-D

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...