tokugawa Posted February 20, 2017 Report Share Posted February 20, 2017 Hello. Can Nissan GTS - GTR G4 + Xtreme Plugin use Toyota electromagnetic crank angle sensor 24 teeth? I want to move 4AG 20v Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 20, 2017 Report Share Posted February 20, 2017 Yes any of our plugin ECU's can use any of the trigger modes that are available in the software. I cant think of any other problems that will prevent this from working. Quote Link to comment Share on other sites More sharing options...
tokugawa Posted March 15, 2017 Author Report Share Posted March 15, 2017 I was able to connect to LINK plugin GTR on weekend work It is a wonderful ECU of engine sound. By the way, two AUX 1 are written in the help, is it the correct answer? Pin number 106 or 113? Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted March 15, 2017 Report Share Posted March 15, 2017 I referenced a couple diagrams. There is nothing on Pin 113 on the stock harness.It may be that both of those are tied together in the Link board to add some flexibility if you decide you didn't want to use the Fuel pump control segment that is on Pin 106. Quote Link to comment Share on other sites More sharing options...
Simon Posted March 15, 2017 Report Share Posted March 15, 2017 Aux 1 is run to both those pins on the header.On the R32 GTR pin 106 is for fuel pump control on other models it is not used.On the R33 RB25DET pin 113 is used for the cam control. Regards SImon Quote Link to comment Share on other sites More sharing options...
tokugawa Posted March 19, 2017 Author Report Share Posted March 19, 2017 HiBrad BurnettSimonThank you very much,The problem has been resolved. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.