Jump to content
powerboy

24-2 Trigger 1 with no trigger 2

Recommended Posts

Is it possible to use Linkecu in this case with two piston engine?
Only 24-2 Teeth without trigger 2.
Ignition are wasted plug.
Fuel are multi points group and 1/2 engine cycle.

 

Share this post


Link to post
Share on other sites

Yes you can run without a cam sensor. You must set trigger 2 sync mode to "none". Fuel mode will need to be set to multipoint group and ign mode set to wasted spark.

Share this post


Link to post
Share on other sites

Yes, Harley's etc are done like this.  You have to use custom tdc mode and I think  there is a special ignition setting for oddfire wasted spark (I'm not at a pc now to check)

Share this post


Link to post
Share on other sites

The engine is suzuki sv 650.???? I am trying to run this v-twin engine without results. It's posible run this engine without cam sensor?

 

Even in odd fire engine?

Yes, Harley's etc are done like this.  You have to use custom tdc mode and I think  there is a special ignition setting for oddfire wasted spark (I'm not at a pc now to check)

Actually, I just thought about this a bit deeper and I think I might be wrong here.  I think for odd fire wasted spark a cam sync will be necessary, possibly direct fire will work though.  I will have to try some tests with a scope connected to an ecu to confirm.  I might be able to do that on Monday.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...