Jump to content
chw37

SupraLink Aux Outputs

Recommended Posts

CAn anyone advise me on any useable aux outputs on the supralink?

I have a pair of electric fans i would like to wire for the ecu to control but im unsure whether there are any spare aux outputs i can use

 

Cheers

Share this post


Link to post
Share on other sites

Aux 9 on the expansion connector is available.

Aux 10 is controlling the purge solenoid, you could use this if you eliminated that.

Aux Inj 7 is controlling the O2 sensor heater for the stock narrow band. Could use this if not using the sensor.

Aux Ign 8 is controlling the fuel pressure increase solenoid.  Could use this if you just run the vac line from the manifold straight to the FPR.

 

All this information is in the help file under G4+ plug in installation manual> pin functions> supralink

Share this post


Link to post
Share on other sites

I tried searching but i still cant find the help files

 

But thanks anyway i will use the purge solenoid as thats no longer needed

 

Now to figure out wiring the relays

Share this post


Link to post
Share on other sites

If you are in the software and click on any parameter then hit the F1 key, it will take you straight to the description of that parameter in the help file.

Or while in the software, you can click on the help menu at the top, then select contents.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...