Pieter Gouwy Posted April 13, 2017 Report Share Posted April 13, 2017 hi,i've wired my analogue output from my digital AEM afr gauge to the analogue volt of the link G4+ and tried setting it to aem X series for calibration,That showed rich mixture on the laptop screen while it was actually running stoich.I then tried setting up the cal table 4 with the data that came with the AEM gauge instructions, This showed Lean when it was actualy stoich...So 2 different incorrect results.Does anyone have the correct calibration table values?I've searched and the only thing what i came across was @Brad Burnett that had an outcome for this problem, but nothing solid.According to the search files i read it has something to do with the gain on the AEM gauge for the voltage. So i'm looking in the right direction i guess Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted April 13, 2017 Report Share Posted April 13, 2017 Heres an example of where I end up with those units Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.