Jump to content

DBW issue on LSX motor


AbbeyMS

Recommended Posts

I have run into tons of issues calibrating the throttle on e throttle set ups.

Link actually changed the procedure so you can manually enter the values if it wont do it on its own.

Simply put the e throttle into set up mode and move the throttle blade with your hand full closed and full open.  Note the AN volt values for sub and main and then manually enter them.

You used to not be able to manually enter them in the past.

That should get you pretty close short of the PID values.

Edited by Brad Burnett
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...