Jump to content
WhiteAfrikanz

Capabilities of DI on XS Loom

Recommended Posts

Ive used up my normal analog inputs on my XS loom and I wanted to see if I can use the digital inputs for my oil pressure with a standard oil pressure sender? I'm not hugely familiar with the DI's and want to make sure this is possible.

Thanks in advance  

 

 

 

Share this post


Link to post
Share on other sites

No.  A digital input can accept a on/off type signal such as a switch or a frequency type signal like a wheel speed sensor.  It cant read analog voltage type signals.  What ecu do you have?  There are possibly other analog pin available on the main header.

Share this post


Link to post
Share on other sites

The ethanol sensors send a PWM (digital) signal with frequency indicating ethanol content and pulse width indicating temperature.

Share this post


Link to post
Share on other sites

On the GTT plugin you potentially have a couple of AN Volt inputs available on the main header.

AN Volt 1 on pin 54 was originally for the MAF, if you no longer have a MAF then you can use this input.

AN Volt 2 on pin 50 was originally for the narrowband oxygen sensor, you may be able to do away with this and use it for something else.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...