Jump to content

Trigger offsets

Recommended Posts

Hi ,

 I seem to be having problems adjusting the crank trigger offset ,the set up is 36-1 trigger wheel and no cam trigger .Trigger 2 is set to "none" engine sparks and has a injector duty but wont start .

Timing light is showing 110 degrees btdc

In the calibrate trigger section ,the trigger offset and the ref timing have a locked padlock which I have been unable to remove 

If I attempt Adjust the offset in the set basic timing section it always reverts to 0 

Any advise would be greatly appreciated 

Cheers Dave

Share this post

Link to post
Share on other sites

You need to do it in the "set base timing screen" and you need to hit enter after you change the offset value.  That should be all there is to it.

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...