Jump to content
Anthony Parle

Turning Injectors and coils off

Recommended Posts

This may sound strange but I am using a Subaru EG33 on a dyno but have killed off 3 cylinders by removing the rods and pistons.  As a result I only have the right bank operational which means I don't need the left operational.  At this point I have the injectors and coils unplugged but I wonder if there is not a better way and turn them off in the ECU.  Its a Link G4+ Thunder.

Here is a video of it running.

Share this post


Link to post
Share on other sites

Do the cylinders still fire 240 degrees apart?  If so it will just be a matter of setting the number of cylinders to 3 and setting the correct firing order.  Injectors will need to be wired to inj driver 1, 2 & 3 and same with ignition.

If they dont fire 240 apart then you will have to turn on "custom TDC" mode and set up the TDC table.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...