nwt1976 Posted May 26, 2017 Report Share Posted May 26, 2017 want to operate purge solenoid. couldn't find any information from help content or wrx v5/6 base map on wiring and configuration wrx v5/6 plug n play Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 26, 2017 Report Share Posted May 26, 2017 The purge solenoid on this model should be connected to pin B135-7 at the header. Inside the ecu this pin is not connected to anything. On this ecu most of the aux outputs are already used up so the most logical choice would be to connect this pin/wire to Ign 7 or 8 outputs on the expansion connector.The configuration is pretty simple, just set the function of whichever aux output you decide to use to "purge". Quote Link to comment Share on other sites More sharing options...
nwt1976 Posted May 26, 2017 Author Report Share Posted May 26, 2017 Cheers for verifying PIN number for purge. Will use expansion connector Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.