Jump to content
pitz

3 cylinder daihatsu EJ-VE 1000cc

Recommended Posts

That wheel looks to have 3 evenly spaced teeth (120deg apart) and an extra 4th tooth.

Unfortunately this is not a supported trigger pattern.

Best option would be to make a replacement trigger disk with say 12-1 teeth (12 evenly spaced teeth with one removed leaving 11 teeth and a gap)

 

Regards

 

Simon 

 

Share this post


Link to post
Share on other sites

I'm assuming that wheel fits the crank? It looks very much like a Subaru crank wheel but this would require a matching pattern on the cam to give a matched pair to the Subaru.

You want a very basic pattern such as 12 missing 1, 24-1 or similar.

 

Share this post


Link to post
Share on other sites

If engine speed is not correct then its not working.

The issue with patterns above is they require a custom code in the firmware to make them work. We have one that matches the crank but it requires the other half from a cam sensor to decode.

So that is matches what is used on the Subaru.

We want a wheel that has evenly spaced teeth with 1 or 2 missing in a single location. Not multiple teeth missing in different spots. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...