Jump to content
MarcD

CLL fuel correction %

Recommended Posts

looking through some logs I see that the Closed Loop Lambda is active in a number of locations.

I note that the scale is fuel %

is it the same % as main fuel table?

i.e. if it shows CLL has added 3.4% fuel in a certain cell, if I retrospectively go into main fuel table and adjust the number by that amount, it would mean the fuel table is then tuned to match the AFR table?

 

Thanks
Marc

 

 

Share this post


Link to post
Share on other sites

i.e. if it shows CLL has added 3.4% fuel in a certain cell, if I retrospectively go into main fuel table and adjust the number by that amount, it would mean the fuel table is then tuned to match the AFR table?

Yes your logic here is correct.

Note another method is to do logs with CLL turned off, you can then use the mixture map function to automatically apply adjustments to the fuel table.

Share this post


Link to post
Share on other sites

HI Adam

is there a way to get mixture map to "add back" the correction that CLL has applied and is registered in the log and then apply to the fuel table?

 

am leaving CLL on as cheap insurance but want to ensure I am as close as possible with the map.

 

thanks

Marc

Share this post


Link to post
Share on other sites
21 hours ago, MarcD said:

is there a way to get mixture map to "add back" the correction that CLL has applied and is registered in the log and then apply to the fuel table?

This is not possible at present.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...